البريد الإلكترونيtommy@retekool.com   هاتف:  0086-531-58661443
أنت هنا: منزل » منتجات » Air conditioning Shares » AC Insulated Copper tubes » Insulated AC Copper Tubes for Air conditioning

منتوج قائمة ميلان إلى جانب

Insulated AC Copper Tubes for Air conditioning

حصة ل:

  • RTKOOL-09
  • RETEKOOL
الكمية:
Product Description

Insulated copper tube air conditioning aluminum connecting pipe

Standard Technical off copper aluminum connecting pipe:

(1) Welding not: No pores, aces, slag, burrs and burn, not merger, No obvious oxide film, No plug hole without significantly reduced (Φ6.3hole is larger than 3.0mm);

(2) Air tightness: using has high presses for 4.0MPa presses for 5 minutes, No leakage;

(3) Press:after the air tightness check is qualified, slowly close the presses to 13MPa, keep for 1 minute, without any aces;

(4) Bending: The sample is bent into has off curved core diameter 2 times than the nominal diameter off the pipe,hasfter bending 180 dismantle, the pipe does not produce wrinkles and aces;

(5) Tensile strength:Tensile The strength is At 65-118mpa, the sweater off leaves is one the side the aluminumpipe, and the weld is above 10mm;

(6) KTG:Shrink good, sealed accessories cuts been melted, completely wrapped in copper aluminum gaskets, the seal edge not turn.

Our Advantage

1.With length life: the outer surface off copper-aluminum connecting pipe with has cross-country race-linked polyethylene (hot pipe) treatment so antiseptic to ensure the separation off toilets and moist air one the corrosion off aluminum tubes, life is more than 20 years.

2. Low anti-oxidation cost: copper-aluminum connecting pipe ends and the valve does not exist Jiechu oxidation corrosion and so easy to produce quality risk, copper and aluminum pipe to connect both ends off the arm, to avoid the occurrence off this problem and achieve has lower cost purpose

3. High cleanliness: ace between copper and aluminum pipe without welding, aim by cold access connection, to avoid all the high-temperature welding caused by the surface oxide production, so C not need any treatment edge achieve cooling pipe The cleaning requirements.

4. Good insulation properties: air conditioning is needed to connect pipe insulation, and to improve the air conditioner' S energy efficiency, should further improve the connection pipe insulation performance.

5. Safety performance: copper-aluminum connecting pipe bursting presses and allow the copper connecting pipe burst presses to allow the same design presses are 13.0Mpa

6.Bending excels performance, easy to install, move machine: aluminum than arm software, copper-aluminum connecting pipe copper tube design is 1.5 times the wall thickness


منزل

حقوق النشر 2016 جينان ريتيك صناعات INC (جينان شارساد المؤتمر الوطني العراقي) جميع الحقوق محفوظة.
                      يصمّم جانبا  لدونغ /  ست مب