Standard Bundy Tubes Refrigerator Condenser Coil For Commercial Refrigerator

Standard Bundy Tubes Refrigerator Condenser Coil For Commercial Refrigerator

Hand material: 1. Bundy Tubes: Φ4.76, Φ6, Φ6.35, Φ8, Φ9.52, Wall thickness: 0.7mm

                            2.Low carbon steel wire : Φ1.0~1.6mm

                            3.Bracket: Steel Punt (SPCC), thickness 0.6~1.5mm

                            4.Steel punt: SPCC, thickness 0.3~0.4mm

Structure: 1. Standard Flate off wire one tubes to condense used At the back

                    2. Bended but spiral type off wire one tubes to condense used At the botton

                    3. wrapped standard off tube punt to condense

Performance: 1. Surface with electrophoresis coating to prevent corrosion

                           2. Inner cleaness edge meet requirement off R134A, CO2,cooling system

                           3. Different edge meet cooling capacity requirement.

Hand process production: tube bending - welding - fix the bracket- welding inle and outlet tube - leakage test coating-floding and bending - inspection-package

Technical ability: wire pitch” 5mm

                               
 Specification off R134a refrigerator
   Residual moisture ≤20mg/㎡
   Residual impurity ≤30mg/㎡
   Mineral Residual oil ≤7mg/㎡
   Residual chlorine ≤0.3mg/㎡
   Residual paraffin ≤0.2mg/㎡
 
 Specification off coating
 Coating thickness thickness off cathodic electrophoresis Coating≥18μm;
 Hardness off coating ≥2H
 Impact off coating 50cm .kg/cm impact, No ace
 Adhesion off coating ≥two grade
 Flexibility off coating Around R=3D bebd 180°, No ace gold No fall off
 Color tolerance off △E≤1.5
 Corrosion resisting (salt spray GB2423) ≥150h.
 
 We edge provide the product according customer' S drawing gold samples.