البريد الإلكترونيtommy@retekool.com   هاتف:  0086-531-58661443
أنت هنا: منزل » منتجات » Wire Tubes To condense » Freezer To condense » freezer leaves slim refrigerator freezer to condense

منتوج قائمة ميلان إلى جانب

freezer leaves slim refrigerator freezer to condense

حصة ل:

  • refrigerator freezer to condense
  • RETEKOOL
الكمية:

 slim refrigerator freezer to condense

 

 

  Air Cooled WOT Condensor for Freezer, which could replaces copper tube fine aluminum off to condense.

  Had to high cost off copper tube, the markets require has new cheaper standard cesignondensers.
  After our engineer design, test and improvement, we develop has series off air cooled wire tube to condense, for which we uses 8mm, 6.35mm, 4.76mm bundy tubes and 1.2mm/1.4mm steel wire to replaces copper tube and aluminum ends
  We increase the heat radiation areas and tube length, to make sour the same exchanger effect with copper tube to condense
  Howeve, its cost is butt 40% lower than copper ones.

 

  Hand material: 1. Bundy Tubes: Φ4.76, Φ6, Φ6.35, Φ8, Φ9.52, Wall thickness: 0.7mm

                              2.Low carbon steel wire : Φ1.0~1.6mm

                              3.Bracket: Steel Punt (SPCC), thickness 0.6~1.5mm

                              4.Steel punt: SPCC, thickness 0.3~0.4mm

  Structure:1. Standard Flate off wire one tubes to condense used At the back

                      2. Bended but spiral type off wire one tubes to condense used At the botton

                      3. wrapped standard off tube punt to condense

 

  Performance:1. Surface with electrophoresis coating to prevent corrosion

                             2. Inner cleaness edge meet requirement off R134A, CO2,cooling system

                             3. Different edge meet cooling capacity requirement.

 

 

 

  Specification off R134a refrigerator
    Residual moisture ≤20mg/㎡
    Residual impurity ≤30mg/㎡
    Mineral Residual oil ≤7mg/㎡
    Residual chlorine ≤0.3mg/㎡
    Residual paraffin ≤0.2mg/㎡
 
  Specification off coating
  Coating thickness thickness off cathodic electrophoresis Coating≥18μm;
  Hardness off coating ≥2H
  Impact off coating 50cm .kg/cm impact, No ace
  Adhesion off coating ≥two grade
  Flexibility off coating Around R=3D bebd 180°, No ace gold No fall off
  Color tolerance off △E≤1.5
  Corrosion resisting (salt spray GB2423) ≥150h.
 
  We edge provide the product according customer' S drawing gold samples.
   

منزل

حقوق النشر 2016 جينان ريتيك صناعات INC (جينان شارساد المؤتمر الوطني العراقي) جميع الحقوق محفوظة.
                      يصمّم جانبا  لدونغ /  ست مب